Hello everyone! I am using Lubuntu and wabbitcode to experiment with z80 assembly. I am a complete beginner and my experience in programming includes a little TI basic, C# and C++, but I am not fluent or especially good, though I have a little experience.

I am using the "ion" assembly shell for TI 83 on my TI 82 stats (te TI 82 stats is more similair to the TI 83, I have heard). And I can install Ion on it, so that's fine.

If I manage to compile a program in wabbitcode to an ti 82 or 83 format, and I send it to my calculator, it displays the program in the list, but I can't choose it. It says "L/hi". "hi" is the filename.

Program a

Program b

Program c <- The "cursors" stops here.

Program L/hi <- It won't mark it.

Though, if I delete all programs except for "hi", it works to execute it, but nothing special happens, it just put some text on the screen that looks like TIBASIC commands.

I will put the error messages down b

Error message in wabbitcode. If I "comment out" the 87th line, the program will compile, but then it just says "L/hi" on the TI program list.

Pass one... KEYS.INC:87: error: Cant figure out this line -VARS = 56 ; VARS Y-VARS K_ANGLE = 57; MATRIX ANGLE K_LIST = 58 ; STAT LIST K_CALC = 59 ; TRACE CALC K_QUIT = 64 ; MODE QUIT K_LINK = 65 ; x,T,theta LINK K_GRAPH = 69 ; GRAPH GRAPH K_MODE = 70 ; MODE MODE K_WINDOW = 73 ; WINDOW WINDOW K_YEDIT = 74 ; Y= Y= K_TABLE = 75 ; GRAPH TABLE K_TBLSET = 76 ; WINDOW TblSet K_TRACE = 93 ; TRACE TRACE K_PLUS = 129 ; + + K_MINUS = 130 ; - - K_TIMES = 131 ; * * K_DIV = 132 ; / / K_POWER = 133 ; ^ ^ K_LPARAN = 134 ; ( ( K_RPARAN = 135 ; ) ) K_LBRACK = 136 ; * [ K_RBRACK = 137 ; - ] K_STO = 139 ; STO> STO> K_COMMA = 140 ; , , K_NEG = 141 ; (-) (-) K_PERIODE = 142 ; . . K_0 = 143 ; 0 0 K_1 = 144 ; 1 1 K_2 = 145 ; 2 2 K_3 = 146 ; 3 3 K_4 = 147 ; 4 4 K_5 = 148 ; 5 5 K_6 = 149 ; 6 6 K_7 = 150 ; 7 7 K_8 = 151 ; 8 8 K_9 = 152 ; 9 9 K_EE = 153 ; , EE K_SEMI = 154 ; 0 ; K_A = 155 ; MATH A K_B = 156 ; MATRIX B K_C = 157 ; PRGM C K_D = 158 ; X^-1 D K_E = 159 ; SIN E K_F = 160 ; COS F K_G = 161 ; TAN G K_H = 162 ; ^ H K_I = 163 ; X^2 I K_J = 164 ; , J K_K = 165 ; ( K K_L = 166 ; ) L K_M = 167 ; / M K_N = 168 ; LOG N K_O = 169 ; 7 O K_P = 170 ; 8 P K_Q = 171 ; 9 Q K_R = 172 ; * R K_S = 173 ; LN S K_T = 174 ; 4 T K_U = 175 ; 5 U K_V = 176 ; 6 V K_W = 177 ; - W K_X = 178 ; STO> X K_Y = 179 ; 1 Y K_Z = 180 ; 2 Z K_XTO = 181 ; x,T,theta x,T,theta K_PI = 182 ; ^ Pi K_INVERSE = 183 ; X^-1 X^-1 K_SIN = 184 ; SIN SIN K_ASIN = 185 ; SIN SIN^-1 K_COS = 186 ; COS COS K_ACOS = 187 ; COS COS^-1 K_TAN = 188 ; TAN TAN K_ATAN = 189 ; TAN TAN^-1 K_SQR = 190 ; X^2 X^2 K_SQRT = 191 ; X^2 SQRT K_LN = 192 ; LN LN K_EX = 193 ; LN e^X K_LOG = 194 ; LOG LOG K_TENP = 195 ; LOG 10^X K_ANS = 198 ; (-) ANS K_COLON = 199 ; . : K_QUEST = 203 ; (-) ? K_QUOTE = 204 ; + " K_THETA = 205 ; 3 THETA K_LBRACE = 237 ; ( { K_RBRACE = 238 ; ) } K_ABS = 244 ; X^-1 ABS K_L1 = 245 ; 1 L1 K_L2 = 246 ; 2 L2 K_L3 = 247 ; 3 L3 K_L4 = 248 ; 4 L4 K_L5 = 249 ; 5 L5 K_L6 = 250 ; 6 L6 K_n = 251 ; 9 n K_Vn1 = 252 ; 8 Vn-1 K_Un1 = 253 ; 7 Un-1

The program that I want to put in my calculator

#include "TI82.H" #include "KEYS.INC" .ORG START_ADDR .DB "Example program",0 ROM_CALL(CLEARLCD) LD HL,0 LD (CURSOR_POS),HL LD HL,Data ROM_CALL(D_ZT_STR) Pause: CALL GET_KEY CP G_ENTER JR NZ,Pause RET Data: .DB "My 1st Program!",0 .END

I hope this is enough. It really bugs me to not get it to work, haha, I was playing with all evening yesterday.

My goal is to be able to make a .z80 assembly program that does something "simple", convert it to a Ti calculator format and run it. That's all, it doesn't necessarily have to be this program. I can't seem to find a good z80 tutorial though.

**Edited by dargueta, 17 April 2014 - 07:13 PM.**

Fixed horrifying lack of formatting. :P