help with project

[wenwang]

i'm facing a problem with my final year project.

the situation is,
if switch 1 is pressed, LED will light up and when switch 2 is pressed again, the LED will go off.
I have attach a text file, which i done half way.
So i need someone to guide me along with the programming part.

For your information, I'm using the PIC16C745 microchip.

[Lop]

I'm not sure what I am looking at here. Are these binary numbers for turning on and off the LED?

[wenwang]

Originally Posted by Lop

I'm not sure what I am looking at here. Are these binary numbers for turning on and off the LED?

the binary are to set the input/output for the mircochip.
1 as input
0 as output

[wenwang]

i re-write the program again with comments on it..
so i think it will be easier for you all to understand what i'm writing.
anyone whose know how to edit my program to uses 2 switches to on/off LED can reply asap ?
as tml i need to hand up to my supervisor.
thank you!

[rameshkumar]

Originally Posted by wenwang

i'm facing a problem with my final year project.



the situation is,
if switch 1 is pressed, LED will light up and when switch 2 is pressed again, the LED will go off.
I have attach a text file, which i done half way.
So i need someone to guide me along with the programming part.

For your information, I'm using the PIC16C745 microchip.

Hi
you have one problam because you call to main programme which out to on you have declare of main method to call a noop but you have declare of portb,1 those have retrive of port number0 but post are declare of 1to o some problam are declare and some problam have call method

[rameshkumar]

Hi
you have one problam because you call to main programme which out to on you have declare of main method to call a noop but you have declare of portb,1 those have retrive of port number0 but post are declare of 1to o some problam are declare and some problam have call method